Description

MQI+ / M+ Remote Speed Limiter Accessory

With the use of this accessory you will be able to limit the speed of your NIU MQI+ / M+ scooter. By pressing the remote you will be able to lock the mode switcher so that it can only go down in modes and not up. With our programmable motherboards you are able to set the speed of mode 1 to your liking.

Installation

The installation is simple and is doable within 20 minutes.

Remove the panel underneath the dashboard
1. 3 screws on the front side
Adding the accessory
1. Add the white heads into the circuit of the headlight
2. Add the black heads into the circuit of the mode switch
  1. Match the accessory to the remote by opening the white box
  2. Long hold the button inside the accessory until it starts to blink, then short press the button and finally press the button of the remote to match the remote.

How do you know you have the correct connector?

When the correct connector is unplugged and you try to switch modes the mode switcher will not work this means that you have the correct connector that is responsible for circuit of the mode switcher.