Previous Product

NIU NQi Sport MY 2025 and MY 2026 Bluetooth controller speed upgrade, 75 km/h dashboard illustration

€349.95

NIU NQi Sport MY 2025 / MY 2026 Bluetooth controller — €349.95. Choose your model year. 190A battery / 450A phase controller with three programmable modes and an approximate 75 km/h top speed.

Replace the original controller, run the motor self-learning setup and program each mode by Bluetooth. Allow approximately 20 minutes for installation and setup. Designed to retain the original dashboard, lighting, alarm, NIU app and GPS functions on compatible scooters.

SKU: N/A Categories: Motherboards, NIU Controllers, NIU N-Series Accessories

Description

NIU NQi Sport MY 2025 / MY 2026 Bluetooth controller

Replace the original controller on a compatible NIU NQi Sport MY 2025 or MY 2026 with this Bluetooth-programmable 190A battery-current / 450A phase-current controller. Select your scooter’s model year before ordering. Both variants cost €349.95.

Speed and programming

The controller offers three riding modes and a potential top speed of approximately 75 km/h. Actual speed depends on the scooter, battery, motor, programming, rider and road conditions.

Set the maximum speed and acceleration separately for each mode using the Bluetooth app.
Adjust battery-current and motor parameters for the compatible scooter setup.
Configure supported functions through the app and reprogram the controller if the setup changes later.

Keep your original scooter functions

This model-specific controller is designed to retain the original dashboard, lighting, alarm, NIU app and GPS functions when installed and configured correctly on the matching scooter model. Confirm your exact model year before ordering.

Choose your model year

MY 2025: NIU NQi Sport model year 2025, 190A / 450A controller, €349.95.
MY 2026: NIU NQi Sport model year 2026, 190A / 450A controller, €349.95.

Installation and self-learning setup

Remove and replace the original controller, connect the matching plugs and any supplied model-specific adapter, then run the controller’s self-learning feature to match the motor. Complete the model-specific Bluetooth programming before riding. Allow approximately 20 minutes for installation and setup; the exact time depends on your scooter and experience. Follow the supplied instructions and check that all scooter functions work after setup.

Read the NIU controller installation guide.

What’s included

Bluetooth controller for the selected MY 2025 or MY 2026 model
Model-specific adapter where required
Bluetooth programming access and setup instructions

Related NIU controller

For earlier NQi Sport, N1S or N1 models, see the NQi Sport / N1S / N1 Bluetooth controller. Check the model year and fitment before ordering either controller.